19-10-2020, 03:45 PM
1) Yes.
2) Fixes: A) Define the CG1 and CG2 correctly for FLO_FUNC; I assume the ELCIMP input is meant proportional to the input flow HCE. B) Make sure you define the PCG correctly. C) Make sure FI_T is at correct position. See picture below:
2) Fixes: A) Define the CG1 and CG2 correctly for FLO_FUNC; I assume the ELCIMP input is meant proportional to the input flow HCE. B) Make sure you define the PCG correctly. C) Make sure FI_T is at correct position. See picture below: